Many men thought of a penis growth, but the methods they have known are somewhat scared.In medicine, there is a tool such as a vacuum pump.
It is used for surgeries on the male genitals to maintain penis size.
How the pumps act
The principle of operation is quite simple.With the help of a vacuum around the penis, poor pressure occurs, causing stimulation of blood circulation.Because of this, the cavernous tissues are filled with blood, due to which a rapid growth and strengthening of the penis occur.A similar phenomenon in medicine is called hyperemia.
During a lift, the penis fabric is poured with blood, from this they swell tightly.Vacuum pump stimulates vessels and allows you to maintain a member size from 30 to 60 minutes.Also, this device can be used instead of a massage.
Pressure in the balloon expands cave bodies, significantly increasing blood flow and penis size.The member behind the pump looks much more spectacular than with ordinary excitement.
Do not abuse the vacuum pump during use.Genuals will not become more than it should, but bleeding, bruises and other complications can happen well!
varieties
All vacuum pumps have a similar design, ignoring their principle of action.The ship in which the male organ is located is a plastic balloon with separation.Together with it, in the set there is a stamp and a pear, which pumps pressure within the balloons.
There are accessories with accessories: pressure adjustment buttons, manometers, reset valves.
In the manual air is pumped and removed with a pear or piston.Their application is good at what they are available to anyone who wants to increase their genitals.
In automatic vacuum, it is created using an electric pump that works on the battery.The pressure can be monitored in a mounted pressure gauge, and some samples are equipped with a suction force button.
Water equipment is a more modern option for an increase in male penis.Their principle of action is based on the fact that instead of air, the balloon is pumped with water with a pump.Hydraulic foam has greater efficiency, and its life is longer.
How to choose a pump?
The device is selected according to two criteria: in terms of genitals and a specific task.
- The length of the ship shall be at least 2-3 cm larger than the penis in an excited state;
- The diameter of the breeze must be selected 1-2 cm larger than the diameter of the male member during a lift;
- For those who do this for the first time, experts advise the use of manual pump, where air pumping is performed with a pear.
It is best to buy a camera with a transparent container to monitor the process, and also pay attention to the strength of the material from which it is made.
The pros and cons
A vacuum pump for men can not only increase the size of the penis, but also have a therapeutic effect.If you use it constantly, the volume of the male genitalia is increasing over time, and during sexual intercourse, the rise remains much longer.This is due to a decrease in organ sensitivity.
Moreover, male dignity grows not only in length but also in width.
Also, under the influence of a vacuum, you can adjust the shape of a male organ, especially if there is a bending.Inside the pump, the penis is evenly held by the edges of the walls, thus it is directed.
Consequences of improper use:
- Due to the violation of the capillaries, the special points arise on the skin of the penis;
- lowering or lifting;
- numbness.
Efficiency when using
With continuous use, after six months the shape and size of the penis will become unchanged.The result will be much more effective if you take medicines that increase male hormone release during this time.
The member after the pump was up to 3 cm longer, for a period of 6 months to one year.The thickness of dignity increased to 2 cm.
Instructions for use
If the vacuum pump is used for the first time, the process should not last more than 5 minutes to avoid unpleasant consequences.Incorrect use can lead to disorders of some functions as well as edema.
To prevent this from happening, the following recommendations should be followed
- First, the air must be pumped from the device, this will improve the circulation of blood flow to the penis.Previously, it is necessary to take care of the penis lubrication.
- An increase in the penis should not last more than 20 minutes.
- To reduce the pressure inside the ship, you need to start the air.To do this, simply press on a separate valve located near a pear.In some models, for these purposes there is a small hole that is covered with a finger during the procedure.
- Once the member has achieved maximum rigidity, you must place a ring at its base, which provides an overloaded with an organ and keeps it in a state of lifting.
- If a pump with a hydraulic pump, then before the procedure it is necessary to take a relaxing bath with hot water.After that, after 8 minutes, male dignity should be placed in a vacuum container.The ring should fit tightly into the scrotum, thus reducing the pressure in the area.The device is placed so that the distance from the penis to the breeze wall is the same on all sides.It is important to do this before the suction moment begins.Observing these instructions, damage can be avoided.
- To form a vacuum environment, experts advise to make some oscillating movements.Then excess water is lowered using a cause.Sometimes the pump must be pressed several times so that all the excess fluid is removed.
- After watering, you can rest a little, then proceed to the procedure.If the pressure drops, it should be pumped to the required level.
The advantage of the male can be increased using a series of special exercises, but for this it is necessary to follow all the recommendations for using the device.
Throughout the first week, the procedure is performed 10 minutes once a day.
In the second week, 15, for the third 10 minutes twice a day.
Fourth - twice a day for 15, fifth - 20 minutes in the morning and 10 in the evening.
Possible consequences
With improper use of the device, injuries often occur.
- Due to the lymph stagnation, a swollen ring appears around the head of the penis.Sometimes this problem can even happen with the proper use.In such cases, it is best to stop the procedure for a while.
- As a result of prolonged manipulations or low pressure on the boat, a large flow of lymph occurs, forming swelling.
- Determining a rise is the most common consequence.
- With a strong load, a change in skin color can occur.Due to severe discharge, bleeding often occurs, which can be irreversible.
- Blood vessel bloches is the rarest but dangerous problem, so it is best to push the venture to increase the penis.
Contraindications
The duration of the vacuum environment is determined by the expansion of cells.Depending on all recommendations for the use of the device, a pulse effect inside the ship is created.As it increases, negative pressure occurs, which causes numbness, and a person does not feel pain.
The maximum vacuum volume should not cause pain, but a single effect no more than 18 seconds.The duration of vacuum manipulation a day should not exceed 45 minutes.
Member's male penis has the following contraindications:
- diabetes mellitus;
- Sexually transmitted diseases;
- inflammation of the urethra;
- deterioration of the functions of the excretion organs of the digestive system;
- cardiovascular pathology;
- The risk of blood clots.
The operation of the device
In order for the device to maintain its suitability as long as possible, it needs special care.Given that manipulations are carried out in an intimate place that requires careful compliance with personal hygiene rules, the pump should be treated with antibacterial solution.
Before use, it is recommended to wash the vacuum pump with warm water and soap, and treat all its ingredients with antiseptic.After the procedure, this invention is again sterilized, wiped and stored in a clean, dry place.
How to do it ourselves?
The device can be useful not only to increase the size of a man's genitalia or healing therapy.
The pumps can be made from makeshift tools stored in the garage or pantry.
From the cufflink pump
Before you start production, it is necessary to prepare all the spare parts and tools that may be useful to use.A vacuum pump is usually made from a machine or a bike pump.This is the simplest and most reliable method.
First you need to create the opposite effect of the pump so as not to supply air, but on the contrary, bring it out.To perform such an effect, it is necessary to release the pump, turning the cuffs with the back, then collecting the device.This will create a vacuum environment.
Next, mount the control valve for excess air deduction.The aquarium compressor valve is suitable for this.Is mounted on the pump hose to prevent air penetration into the pump.For a greater effect, it is advisable to sign it.
This method is the simplest, and is created to create a shallow vacuum environment.Performance is up to 80% air pumping.If you need to make a more powerful pump, you can use a home compressor.
Using a medical syringe
We make a vacuum pump from a regular medical syringe.For this, the following materials will be needed:
- Plastic;
- a plastic tube, which must coincide with the diameter of the tee and syringe holes;
- two valves from the aquarium compressor;
- Syringe (the power of the next device depends on its size).
From the plastic tube, it is necessary to cut three pieces of 10 cm, then attach them to the top.The connections must be airtight and well fixed so that they do not jump when the pressure occurs.It should be dealt with three dancers.
One of them, which is in the center, is attached to the syringe nose.At the remaining two ends, it is necessary to install the valves, and one must open, the other the inner.In order not to confuse, the arrows are usually placed in the aquarium valves indicating the direction of air movement.
Such a device made from one syringe can pump the juice from one container to another.
To perform the procedure, a traction with a valve sits in the liquid, and the second on an empty vessel, which must be filled.The pump is directed using a piston.